ENS-1065DC Lithium Battery Module Charge And Discharge Tester

ENS-1065DC Lithium Battery Module Charge And Discharge Tester

ENS-1065DC lithium battery module charge and discharge tester is used to quickly solve the problem of inconsistent lithium battery voltage, and can also create any battery voltage difference. Applicable to various types of lithium battery packs, it is an ideal test table for battery manufacturers and distributors to test batteries.

Send Inquiry

Product Description

Product Introduction of ENS-1065DC Lithium Battery Module Charge And Discharge Tester

ENS-1065DC lithium battery module charge and discharge tester is used to quickly solve the problem of inconsistent lithium battery voltage, and can also create any battery voltage difference. Applicable to various types of lithium battery packs, it is an ideal test table for battery manufacturers and distributors to test batteries.


Product Features of ENS-1065DC Lithium Battery Module Charge And Discharge Tester

1). The product uses customized nickel-chromium alloy resistors as the load source. Low resistance value; can achieve a larger current discharge, customized appearance makes the power density higher. High precision; accuracy can be controlled within ±0.001Ω, as a load source to make the discharge process more stable. Low temperature coefficient; little influence by temperature coefficient, strong environmental adaptability. Resistant to current impact; strong current resistance, can quickly respond to large current impacts, and the discharge process is more reliable.


2). Smart chip control. Intelligent control of the discharge process, automatic adjustment following the drop of battery voltage to ensure constant current discharge. The voltage of a single battery is collected in real time and displayed in a curve manner, which is convenient for evaluation and analysis. At the same time, it intelligently analyzes the battery voltage status and makes an evaluation. Intelligently calculate the conversion between the discharge capacity and the discharge hour rate to achieve the best evaluation effect of the battery capacity status. A variety of threshold thresholds can be set, intelligent judgment.


3). 7-inch large LCD touch screen: It adopts a 7-inch large-size bright touch screen with a resolution of 1024x600, which can be clicked directly on the screen. It is simple and clear, with strong anti-interference ability.


4). Automatic discharge current calculation function: Built-in discharge coefficients for each hour rate, which can automatically calculate the discharge current that needs to be set according to the nominal capacity of the battery under test and the required discharge rate.


5). Charge and Discharge curve view: The voltage and current curves of the battery pack during the charge and discharge process can be reviewed.


6). Data transfer: The host is configured with U disk for data transfer, and the data analysis software can analyze the data and support report generation.


Technical Specifications of ENS-1065DC Lithium Battery Module Charge And Discharge Tester


Charge and discharge voltage range
5-106V
Charge and discharge current range
0-50A
Power Input - AC
Single-phase AC 220V, the frequency range is 40-60Hz.
Operation mode
Touch screen
Display
7 inch TFT LCD screen, resistive touch screen, resolution 1024x600
Communication
RS485x1
Internal data storage
128MBit
Voltage measurement accuracy
±0.5%FS+0.1V Max.
Current measurement accuracy
±1%FS+0.1A
Group voltage display accuracy
0.01V
Group current display accuracy
0.1A
Discharge current control accuracy
±1%FS
Protection
Over temperature, over current, current out of control trigger shutdown protection
Emergency stop
High voltage DC switch 120A
Reverse connection protection
Support
Abnormal protection
Power line power failure protection, main cable power failure protection
Over temperature protection
Resistance box over temperature 85℃; radiator over temperature 100℃
Protection
Over temperature, over current, current out of control trigger shutdown protection
Safety test
Withstand-voltage test
AC input-chassis: 2200Vdc 1min AC input-chassis
DC input-output: 2200Vdc 1min DC input-chassis
Working temperature
Cooling
Forced air cooling
Temperature
Operating temperature range: -5~50℃; storage temperature: -40~70℃
Humidity Relative Humidity 0~90%(40±2℃)
Altitude
Rated 2000 meters above sea level

Note: If the product has special requirements, you can call our company to customize.


Hot Tags: ENS-1065DC Lithium Battery Module Charge And Discharge Tester, Manufacturers, Suppliers, Buy, Factory, Customized, China, Cheap, Low Price, Price, Price List, Quotation, Ce, Newest, Quality, Easy-maintainable, Latest Selling, Environmental Protection, Energy Saving, Easy Operation, Stable, Low Failure Rate, Safety, Precision, Long Life, Wholesale, Made In China, Buy Discount, 1 Year Warranty Repair Service, ISO9001, ISO45001, ISO1400, Advanced, Durable, Worth Buying, Highly Recommend, Hot Sale, Brands, Discount, Trade Price, Maintenance Free, Intelligent, Rechargeable, Deep Cycle, High Performance, Safety, High Capacity, Light Weight, Large Capacity, High Power

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.